BEAM Dual Mode Iridium/GPS Magnetic Antenna

$1,099.00 (Inc. GST)
$999.09 (Ex. GST)
(No reviews yet) Write a Review
SKU:
RST705
Shipping:
Calculated at Checkout
BEAM Dual Mode Iridium/GPS Magnetic Antenna (RST705)

BEAM Dual Mode Iridium/GPS Magnetic Antenna

Iridium and GPS Mag Mount Antenna (RST705) is designed for Vehicle / Land based applications. Designed to work with Beam tracking products and can work with other Iridium / GPS based devices. RST705 Mag Mount antenna is designed to be very low profile. With the Magnetic mount, the antenna is very easy to install and move from asset to asset and doesn’t require any holes to be drilled for fitting. Included is 6m of both Iridium & GPS antenna cable, making the RST705 is a very cost effective solution.

Specifications
Cable Includes 6m or 19.7 feet of LMR240 Iridium Includes 6m or 19.7 feet of LMR240 GPS
Voltage Iridium: Passive GPS L1: 3VDC
Amplifier Gain Iridium: Passive GPS L1: 26db (35mA)
Altitude 20,000'  
Colour White  
Connector TNCM Iridium SMAM GPS
Operating Temp Celsius -40° to +70° Fahrenheit -40° to 158°
Weight 1.0Kg or 2.2lb Max (Cable weight included)  
Length 84mm 3.3 inches
Width 56mm 2.2 inches
Height 21mm 0.8 inches
Finish Base – Aluminum Radome – High Impact, white
VSWR < 2.0 : 1  
Impedance 50 OHMS  
Noise Figure 2.5db Max  
Axial Ratio 3db Max at boresight  
Polarization Right Hand Circular  
Frequency (Iridium)11616 – 1626 MHz (GPS)1575.42+/- 5MHz
Physical Specifications
Outer Box Dimensions 210 W x 210 D x 90 H 
(mm)
8.27 W x 8.27 D x 3.54 H 
(inches)
Box Weight 0.63 kg 1.39 lbs
BEAM WARRANTY TERMS & CONDITIONS Beam Communications gives this express warranty (along with extended warranty endorsements, where applicable) in lieu of all other warranties, express or implied, including (without limitation), warranties of merchantability and fitness for a particular purpose. This constitutes our sole warranty and obligation with regard to our products as well as the Customer’s sole remedy. Beam Communications expressly disclaims all liability and responsibility for any special, indirect or consequential damages or any further loss of any kind whatsoever resulting from the use of our product(s). The Customer’s sole and exclusive remedy and the limit of Beam’s liability for any loss whatsoever, shall not exceed the purchase price paid by the Customer for the product to which a claim is made. All products manufactured by Beam Communications are warranted to be free from defects in material and workmanship in accordance with and subject to the following terms and conditions: 1. This warranty is limited to the original Customer only. It cannot be transferred or assigned to third parties unless the intent to transfer to a third party is expressly indicated in a purchase order and/or warranty-processing arrangements have been agreed upon in writing by Beam. 2. Beam Communications does not warrant any installation, maintenance or service of the Products not performed by Beam, nor does it warrant the use of Products with unapproved ancillary products. 3. Beam Communications will correct any defects in material or workmanship of products manufactured by Beam which appear within twelve (12) months, from the date of shipment by Beam Communications to the Customer. Exception to a 12 months warranty are: • Units that they do not carry a transceiver (24 months warranty) • Accessories (3 months warranty) Please note that antennas and products not manufactured by Beam (like; NAL Shout Nano, Man down Kit, RST970, 9522B and 9602) also come with a 12 month warranty. Beam Communications will repair or replace, at our option, any defective product, provided that our analysis and/or inspection disclose that such defects developed under normal and proper use. 4. This warranty does not extend to goods subjected to liquid or particulate ingress, extreme humidity, misuse, neglect, accident or improper installation, or to maintenance or repair of products that have been altered or repaired by anyone except Beam Communications unless otherwise stated in writing. If a product has been tampered with (e.g. warranty seal has been removed, wrong cable has been used with an antenna), the warranty will be void. 5. The warranty is a return-to-base warranty and freight is paid by the sender. 6. A charge of USD$195.00 including return freight will be made for testing returned product which is not defective or is found to be defective as the result of improper use, maintenance or neglect. 7. Beam Communications will not accept responsibility for any invoiced goods or services that are not covered by a Beam Communications written purchase order. Under no circumstances does Beam Communications agree to pay for labor or other related expenses associated with the troubleshooting and/or repair of our product without prior specific written authorization. 8. Information in our descriptive literature is based on product specifications that are current at the time of publication. Product specifications, designs and descriptive literature are subject to change as improvements are introduced. Although we announce changes as they occur, we cannot guarantee notification to every Customer. Beam Communications warrants delivered product to conform to the most current specifications, designs and descriptive literature. 9. This warranty policy may be expanded or limited, for particular categories of products or Customers, by information sheets published as deemed appropriate by Beam Communications. In particular, the warranty for third party Products is that of the third party and not Beams warranty. Users in Australia and New Zealand This product comes with guarantees that cannot be excluded under the Australian Consumer Law (ACL) and similar legislation in New Zealand. Consumers are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. Consumers are also entitled to have this product repaired or replaced if the product fails to be of acceptable quality and failure does not amount to a major failure. Please follow the product instructions for correct operation, and report problems promptly; problems caused by use that is abnormal or contrary to instructions will generally not be covered. You should contact your service provider in relation to problems with products and we at Beam will assist your service provider to resolve them, including by replacement where required. Limitations of Warranty/Local Laws This Product is covered by Australian warranty. This Limited Warranty is applicable in all countries and is enforceable in any country or region where Beam or its Reseller offer warranty service for the Product. Outside of Australia, any different warranty terms, liabilities and/or legal requirements of the country in which the Product is sold are specifically disclaimed by Beam. Warranty service availability and response times may vary from country to country and may be subject to registration requirements in the country of purchase. Your Beam Reseller can provide details. Your reseller contact details will appear on the sales documentation. Rev 3.0 May 2013

Get the latest updates on new products and upcoming sales