BEAM Aero Iridium/GPS Aviation Antenna (TSO Approved - C-144)
Beam RST704 TSO Aero Approved dual mode Iridium & GPS patch antenna, designed for aero applications. The RST704 dual mode patch Aero antenna is supplied complete with bulkhead mount that enables it to be securely mounted without the connectors being exposed to the environment. Beam RST704 dual mode patch antenna is fitted with an SMA female connector for GPS and a TNC for Iridium and will work with all Beam tracking products or other Iridium / GPS based devices.
||TNC / SMA
||Celsius -55° to +85°
||Fahrenheit -67° to 185°
||4.5oz or .28lb Max
||< 2.0 : 1
||Right Hand Circular
||1621 +/- 5MHz
||1575 +/- 5MHz
BEAM WARRANTY TERMS & CONDITIONS
Beam Communications gives this express warranty (along with extended warranty
endorsements, where applicable) in lieu of all other warranties, express or implied, including
(without limitation), warranties of merchantability and fitness for a particular purpose. This
constitutes our sole warranty and obligation with regard to our products as well as the
Customer’s sole remedy.
Beam Communications expressly disclaims all liability and responsibility for any special, indirect
or consequential damages or any further loss of any kind whatsoever resulting from the use of
our product(s). The Customer’s sole and exclusive remedy and the limit of Beam’s liability for
any loss whatsoever, shall not exceed the purchase price paid by the Customer for the product
to which a claim is made.
All products manufactured by Beam Communications are warranted to be free from defects in
material and workmanship in accordance with and subject to the following terms and
1. This warranty is limited to the original Customer only. It cannot be transferred or assigned
to third parties unless the intent to transfer to a third party is expressly indicated in a
purchase order and/or warranty-processing arrangements have been agreed upon in
writing by Beam.
2. Beam Communications does not warrant any installation, maintenance or service of the
Products not performed by Beam, nor does it warrant the use of Products with unapproved
3. Beam Communications will correct any defects in material or workmanship of products
manufactured by Beam which appear within twelve (12) months, from the date of
shipment by Beam Communications to the Customer. Exception to a 12 months warranty
• Units that they do not carry a transceiver (24 months warranty)
• Accessories (3 months warranty)
Please note that antennas and products not manufactured by Beam (like; NAL Shout Nano,
Man down Kit, RST970, 9522B and 9602) also come with a 12 month warranty.
Beam Communications will repair or replace, at our option, any defective product,
provided that our analysis and/or inspection disclose that such defects developed under
normal and proper use.
4. This warranty does not extend to goods subjected to liquid or particulate ingress, extreme
humidity, misuse, neglect, accident or improper installation, or to maintenance or repair of
products that have been altered or repaired by anyone except Beam Communications
unless otherwise stated in writing. If a product has been tampered with (e.g. warranty seal
has been removed, wrong cable has been used with an antenna), the warranty will be void.
5. The warranty is a return-to-base warranty and freight is paid by the sender.
6. A charge of USD$195.00 including return freight will be made for testing returned product
which is not defective or is found to be defective as the result of improper use,
maintenance or neglect.
7. Beam Communications will not accept responsibility for any invoiced goods or services that
are not covered by a Beam Communications written purchase order. Under no
circumstances does Beam Communications agree to pay for labor or other related
expenses associated with the troubleshooting and/or repair of our product without prior
specific written authorization.
8. Information in our descriptive literature is based on product specifications that are current
at the time of publication. Product specifications, designs and descriptive literature are
subject to change as improvements are introduced. Although we announce changes as they
occur, we cannot guarantee notification to every Customer. Beam Communications
warrants delivered product to conform to the most current specifications, designs and
9. This warranty policy may be expanded or limited, for particular categories of products or
Customers, by information sheets published as deemed appropriate by Beam
Communications. In particular, the warranty for third party Products is that of the third
party and not Beams warranty.
Users in Australia and New Zealand
This product comes with guarantees that cannot be excluded under the Australian Consumer
Law (ACL) and similar legislation in New Zealand. Consumers are entitled to a replacement or
refund for a major failure and for compensation for any other reasonably foreseeable loss or
damage. Consumers are also entitled to have this product repaired or replaced if the product
fails to be of acceptable quality and failure does not amount to a major failure. Please follow
the product instructions for correct operation, and report problems promptly; problems caused
by use that is abnormal or contrary to instructions will generally not be covered. You should
contact your service provider in relation to problems with products and we at Beam will assist
your service provider to resolve them, including by replacement where required.
Limitations of Warranty/Local Laws
This Product is covered by Australian warranty. This Limited Warranty is applicable in all
countries and is enforceable in any country or region where Beam or its Reseller offer warranty
service for the Product. Outside of Australia, any different warranty terms, liabilities and/or
legal requirements of the country in which the Product is sold are specifically disclaimed by
Beam. Warranty service availability and response times may vary from country to country and
may be subject to registration requirements in the country of purchase. Your Beam Reseller can
provide details. Your reseller contact details will appear on the sales documentation.